Kitchen faucets are one of the most common fixtures in a home, and they usually come with a removable handle. Unfortunately, over time those handles can become stuck or damaged.
In this article, we will show you how to remove the kitchen faucet handle easily.
How To Remove Kitchen Faucet Handle?
If your kitchen faucet handle is stuck, getting it off can be a real pain. Here are some tips on how to remove a kitchen faucet handle easily:
- Make sure you have the right tools. You’ll need a Phillips head screwdriver and an adjustable wrench.
- Start by unscrewing the lower part of the faucet handle. You might have to twist it in order to get it off.
- Once the lower part is unscrewed, use the Phillips head screwdriver to remove the upper part of the faucet handle. Again, you might have to twist it to get it off.
- Replace both parts with new ones and screw them back on tightly.
- Test the faucet by turning it on. If it works properly, you’re done!
Tools You Will Need
If you are frustrated with the handle on your kitchen faucet, there is a quick and easy way to remove it. Here are the tools you will need:
- Phillips screwdriver
- Wrench or channel lock pliers
- Tape measure
- Pipe wrench
- Stiff wire coat hanger or coat hanger clamp
- Screwdriver bit that is at least 1 inch wide (or larger)
Steps For Removal
If you are having trouble removing the kitchen faucet handle, follow these simple steps:
- Place a folded towel or rag over the top of the faucet handle to cover it completely.
- Apply pressure to the handle with your hand in a twisting motion.
- The handle should start to come off after a few twists. If it doesn’t, try using a wrench or pliers to help pull it off.
- Once the handle is off, you can remove the old faucet cartridge by unscrewing the four screws on the underside.
Tips To Prevent from Getting Stuck on The Handle
If you have ever tried to remove a kitchen faucet handle, you know it can be frustrating. Here are some tips to prevent from getting stuck on the handle:
- Make sure the faucet is turned off before trying to remove the handle.
- Wiggle and pull the handle in different directions until it becomes loose. DON’T use excessive force, or you may damage the faucet.
- If the handle is still tight, use a towel wrapped around your hand to break the handle’s grip. Be careful not to cut yourself on the broken pieces of the faucet.
- If the handle is still stuck, use a putty knife to pry it off gently. Be careful not to scratch the surface of the faucet.
Kitchen Faucet Removal Problems
Many people have trouble removing the kitchen faucet handle, whether it is because the screw is tight or the handle is broken. Here are a few tips to help remove a stuck or broken kitchen faucet:
- Get a Grip: If you can’t get a grip on the screw with your fingers, use a tool to pry it off. A thin dowel or stiff wire can also be used as leverage.
- Use Pliers: If the screw is stubbornly lodged in the stem, try using pliers to grip the head of the screw and twist it loose. Be sure to wear gloves if you choose this approach; hot metal can cause burns.
- Use WD-40: If all else fails and you’re still unable to remove your kitchen faucet handle, try spraying WD-40 onto the threads of the screw and workings of the handle, then wiggling it around until it comes free.
- Replace the Faucet: If the handle is broken or the screw is stuck, it may be time to replace the faucet.
How To Remove Faucet Handle No Visible Screws
There are many reasons why a kitchen faucet handle may become stuck or difficult to remove. Sometimes, the screws that hold the handle in place may have loosened or disappeared over time. In other cases, the handle may simply be disengaged from the stem below it. Whatever the reason, removing a stuck or difficult-to-remove kitchen faucet handle is usually a quick and easy task with a few simple tools.
The first step is identifying which tool is needed to free the handle. A trowel can be useful for dislodging stubborn screws, while an adjustable wrench can help loosen screw heads if they are seized. If none of these tools are available, a plastic putty knife can often pry loose stubborn handles by slicing them at an angle.
Once the handle is free, gently pull it off of the stem below it. Be sure not to twist or damage the plumbing beneath the faucet; otherwise, you may need to replace it entirely. Once the handle is free, clean any debris from around the openings where it was attached and reattach using fresh screws if necessary.
If the faucet handle is still difficult to remove, it may be due to corrosion or a buildup of debris inside the handle. In this case, it may be necessary to completely remove the handle and clean it thoroughly. Finally, reattach the handle using new screws and test it for looseness before closing the cabinet doors or turning on the water.
How To Remove Kitchen Faucet with Sprayer
If your kitchen faucet sprayer is stuck and you can’t remove it, you can take a few simple steps to free it.
First, try using a plunger. Place the plunger’s end over the sprayer’s top and push down firmly. This will cause the stream of water to be forced out of the sprayer.
If this doesn’t work, try using a wrench. Wrap one end of the wrench around the stem of the faucet handle and turn it counterclockwise until it starts to come off.
Finally, use a straight edge like a knife or an oven mitt to pry off the handle from the stem.
How To Remove a Single Handle Kitchen Faucet with Sprayer?
If you are having trouble removing the handle from your kitchen faucet with the sprayer attachment, follow these simple steps:
- Turn off the water at the main shut-off valve.
- Remove the aerator from the faucet using a wrench or pliers.
- Loosen the screws that hold the stem onto the handle (4 screws on each side).
- Lift up on one side of the handle and pull it off of the stem.
- Reverse these steps to install the new handle.
How To Fix a Faucet Handle That Came Off
If you have a kitchen faucet with a handle that comes off, there are a few easy steps to fix the problem.
First, use a wrench to loosen the screws that hold the handle. Once they are loose, gently pull the handle off of the spout.
Next, use a pair of pliers to twist the wires connected to the handle until they come off.
Finally, replace any screws or nails holding the handle onto the spout and replace them with new ones.
Conclusion
If you are having trouble removing the handle on your kitchen faucet, try using a wrench to turn it counterclockwise. Once it has turned about 1/4 of a turn, use your fingers to pry the handle off the spout.
Frequently Asked Questions:
How do you remove faucet handles that have no screws?
If you find that your kitchen faucet handle is missing screws, you can easily remove it by following these steps: locate the screw that holds the handle to the spout. The screw should be in a recessed hole on either side of the handle. Use a Phillips head screwdriver to unscrew the screw. Be careful not to strip the head of the screw. Once the screw is removed, pull out the handle to remove it from the spout. Replace the screw with a new one and re-attach the handle to the spout.
How do you remove faucet handles?
If you have a Kitchen Faucet with hard-to-remove handles, there are several methods you can use to remove them. One method is to use a putty knife to pare off the handle’s edges until it pops off in one piece. Be careful not to cut into the rubber gasket or the metal stem. Another method is to heat up a Popsicle stick and insert it into the hole where the handle attaches to the faucet. Once the stick is hot, pull it out, and the handle will pop off. If neither of these methods works, you may need to replace your entire faucet unit.
How do you take apart a single-handle faucet?
To take apart a single-handle faucet, use the following steps: Turn off the water supply to the faucet. Remove the screws that hold the handle in place. Slide the handle off of the stem. Lift out the old cartridge and replace it with a new one. Reattach the handle to the stem and screw it in place. Turn on the water supply and test the faucet function.
How do you remove a 2-handle kitchen faucet?
To remove a 2-handle kitchen faucet, first, use a wrench to tighten the screws on either side of the handle. Next, pull the handle straight out from the pipe. Finally, twist off the old handle assembly and replace it with a new one.