Moen kitchen faucets are one of the most popular types of faucets on the market. They’re reliable, easy to use, and come in a variety of styles. But like any other type of appliance, they can eventually become defective. If your Moen kitchen faucet won’t swivel, there are a few things you can do to fix it.
In this article, we will explain how to repair a Moen kitchen faucet and help you get your water flowing again as quickly as possible.
What To Do If Moen Kitchen Faucet Won’t Swivel?
If you have a Moen kitchen faucet that won’t swivel, you can do a few things to fix the problem. First, try turning the handle counterclockwise until it becomes tight. If that doesn’t work, you can take the handle off and replace it with a new one. If neither of those solutions works, your best bet is to call a professional.
Symptoms Of A Moen Kitchen Faucet That Won’t Swivel
If your kitchen faucet won’t swivel, it might be due to a number of reasons. Here are the most common symptoms and how to repair them:
- The handle is stuck or frozen. Try loosening the screws that hold the handle in place, and try turning the handle back and forth. If that doesn’t work, you may need to replace the handle.
- There might be something blocking the movement of the blade or spray arm. Try cleaning out any built-up residue or debris with a plunger and water. If that doesn’t work, you must remove the faucet and clean it properly.
- There could be a broken component inside the faucet assembly, such as a washer or bearing. If you notice this type of issue, you’ll need to replace the entire assembly for it to function again.
Moen Kitchen Faucet Handle is Hard to Turn
If you are having difficulty turning the handle on your Moen kitchen faucet, there is likely an easy fix. Before taking it apart or replacing the entire unit, try loosening and re-tightening the internal mechanism using a hex wrench. If that doesn’t work, it may be necessary to replace the entire unit.
Kitchen Faucet Hard to Swivel
If your kitchen faucet is hard to swivel, you can do a few things to try and fix it. First, check the screws that hold the arm on. If they’re loose, you can tighten them using a wrench. If that doesn’t work, you may have to replace the arm.
Kitchen Faucet Hard to Turn on And Off
One common issue with kitchen faucets is that they can be hard to turn on and off. This can be a frustrating inconvenience, especially if you just want to take a quick drink or fill up your sink for the day. If your faucet is tough to operate, you can do a few things to fix the problem.
First, check if the water pressure is high enough in your home. Low water pressure can make it difficult for faucets to work properly. Try increasing the pressure by turning on more taps or using a larger water meter.
If the water pressure is fine, but the faucet still isn’t working, check to see if there’s any debris blocking the flow of water. Clear away any objects that may be clogging up the spout, such as leaves or flowers.
If all else fails, you may have to call a professional to service your kitchen faucet.
How To Fix a Stiff Faucet Handle?
If your faucet handle is stiff, it may not be able to turn easily. There are a few fixes you can try. Loosen the screw that holds the handle on. If that doesn’t work, you can try using some pliers to bend the handle back into place. If all of these solutions fail, you may need to replace the handle.
Tips For Fixing a Moen Kitchen Faucet That Won’t Swivel
If your Moen kitchen faucet won’t swivel, there are a few things you can do to fix it.
Check the angle of the spout
The angle of the spout can be adjusted by removing the collar and turning it until the desired angle is reached. This may need to be done in stages, as the spout can become loose after being turned too far.
Check for leaks
Leaks can cause the faucet to lose its ability to move freely. To check for leaks, turn off the water supply to the faucet and use a flashlight to inspect all areas near the water line for any signs of leakage. If you find any, replace the hose or repair/replace seals around fittings as necessary.
Adjust the water flow
If the faucet still does not move freely, you may need to adjust the water flow by adjusting the handle on the spout. To do this, turn the handle counter-clockwise until the water flow is reduced to a minimum, and then turn it back clockwise to increase the flow.
Replace the spout
If none of the above fixes the issue, it may be time to replace the spout. To do this, remove the old spout by unscrewing the knob and then screwing in a new one.
Repairing A Moen Kitchen Faucet That Doesn’t Swivel
If your Moen kitchen faucet won’t swivel, there are a few things you can do to fix it. The first step is to determine the cause of the issue. If the faucet was recently replaced, there could be something wrong with the replacement unit. If it’s been a while and the faucet still doesn’t work, there may be a problem with the plumbing underneath.
If that’s not the case, however, the most likely cause is a loose or broken wire connection within the faucet itself. To test if this is the case, turn off the water supply to the faucet and use a wrench to try and loosen any screws that hold on the baseplate. Once those are loose, pull out the baseplate and check for broken or misplaced wires. If everything looks fine, reattach the baseplate and screw it back in place. If that fails, too, you will need to remove the whole faucet and replace any damaged parts.
If the issue is with the wiring, there are a few things you can do to try and fix it. First, make sure that all of the wires are properly connected. Next, use a wire stripper to remove any old insulation from the wires. Finally, twist each wire around a piece of metal just enough so that it won’t come loose again.
Delta Kitchen Faucet Won’t Swivel
If your delta kitchen faucet won’t swivel, there are a few things you can do to fix it. The most common issue is that the arm on the faucet’s side has detached from the spindle. In order to repair this, you’ll need to remove the entire faucet assembly and replace the arm. Be sure to get a part number for the arm before you buy it so that you can ensure proper fitment when installing it back onto the spindle.
Another common issue with Delta kitchen faucets is that they may be holding water in place too tightly. This can cause the spindle to wear out over time, causing the faucet not to rotate properly. To fix this, you’ll need to loosen up the washer and nut located at the base of the spindle. Once they’re loose, you can then re-install them using a new washer and nut.
If neither of these solutions works, you’ll need to replace the spindle.
Pfister Kitchen Faucet Won’t Swivel
If your kitchen faucet won’t swivel, you can do a few things to try and fix it. You may need to replace the entire faucet assembly or just the gearbox that allows it to turn. In either case, follow these steps to get it working again:
- Turn off the water supply at the main shutoff valve. This is usually located near the sink.
- Remove the handle by unscrewing it from the stem. If you have a two-handle faucet, remove both handles.
- Remove the spray head by unscrewing it from the stem of the faucet body. It should come away in one or two pieces.
- If you have a cartridge-type faucet, remove the cartridge by squeezing its sides together and pulling it outwards. Be sure to discard any old debris inside the cartridge chamber before removing it.
- Inspect all gears inside the gearbox for damage or wear (this is where most malfunctions occur). Replace any worn gears with new ones if possible, and lubricate them with soap and water if needed. Reinstall everything in reverse order, beginning with Step 3: spray head first and then handle/cartridge assembly.
- Reconnect the water supply and turn on the water at the main shutoff valve. If all goes well, the faucet should now work properly.
Kohler Kitchen Faucet Won’t Swivel
If you’re experiencing problems with your Kohler kitchen faucet not rotating, there is a chance that the issue is due to a loose or defective hose.
If this is the case, you can fix the problem by replacing the hose. To do this, unscrew the Hose Nut located on the side of the faucet and remove it. Then, pull out the old hose and replace it with a new one. Reinstall the Hose Nut and screw it back in place.
If your faucet doesn’t rotate after following these steps, you may need to replace the entire assembly.
Conclusion
If your kitchen faucet won’t swivel, you can try a few things to repair it. If the problem is with the spout or handle, you may be able to replace them yourself. If the problem is with the assembly of the faucet, Moen may be able to fix it for you. In either case, take pictures and describe the symptoms so Moen can best diagnose and repair your faucet.
Frequently Asked Questions:
How do you fix a kitchen faucet that won’t rotate?
If your kitchen faucet won’t rotate, you can try a few things to fix the issue. A stuck valve is a common cause of a kitchen faucet that won’t rotate. If the valve is stuck open, water will continue to flow through the faucet no matter how hard you turn it handles. To fix this type of issue, you’ll need to remove the old valve and replace it with a new one. You can also try using a plunger to push the water out from behind the seal. If none of these tips work, you may need to take the entire fixture apart and clean it out.
How do you fix a rotating faucet?
If your rotating faucet is not working properly, there are a few things that you can do to fix it. First, make sure that the water valve is closed off completely. Next, turn off the water supply to the faucet by turning off the main breaker or shutoff valve. Finally, remove the aerator from the spout and clean out any debris that may be blocking the flow of water. Replacing the aerator is usually all that is necessary to get your rotating faucet back in working order.
How do you fix a stiff Moen kitchen faucet handle?
If you have a Moen kitchen faucet that won’t swivel, there are a few things that you can do to fix the issue. First, try lubricating the plastic gear inside the handle with a light coat of oil. If this doesn’t solve the issue, you may need to replace the entire handle assembly. To do this, remove the two screws that hold onto the upper half of the handle and unscrew it from the stem. From there, you can pull off the old handle assembly and replace it with a new one.
How do you fix a faucet handle that won’t turn?
If the handle on your Moen kitchen faucet won’t turn, you can try a few things before calling a professional. Try using some WD-40 to lubricate the internal parts of the handle. If that doesn’t work, you can try using a plunger to push and pull on the handle until it turns. If none of those methods work, then you’ll need to call a professional.